2018 Trenchless Technology Road Show Exhibitor Showcase
May 3, 2018
\r\n
![\"kelso](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/04\/kelso-coatings.jpg\")
<\/a>KELSO COATINGS<\/h4>\r\nCN2000 concrete waterproofing system is a non-toxic, capillary crystalline waterproof material used as a surface coating to protect infrastructure from deterioration. Specifically, CN2000 will protect infrastructure from rapid freeze and thaw cycles, water, chloride ion and other contaminants. CN2000 will protect the reinforcing steel against corrosion and ultimate deterioration of the concrete. CN2000 itself is anti-corrosive, allowing for long lasting results. CN2000 has a patented eka-molecular sieve structure and permeation crystalline effect. The waterproof layer maintains ventilation of the concrete, impermeable to water, and has a high impervious pressure with self-sealing capabilities. CN2000 can be used internally (negative side) or externally in places where rapid and early strength gain is required, such as plugging\/stopping active water leaks and sealing of leaking joints, tie holes and cracks.\r\n
![\"LiquiForce\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/04\/liqui-force.jpg\")
<\/a>LIQUIFORCE<\/h4>\r\nLiquiForce is home to GRAVITY, a totally trenchless program of sewer rehabilitation, from the home to the treatment plant. All of the rehabilitation equipment has been adapted so that it enters through the manholes and the work is done with no disruption to the normal sewer flows. The materials used in the sewer renewal have a design life of 50 years, (with a factor of two) and are expected to last 100 years or more. Through the use of multi-year programs, cities have found that savings of 50 per cent and more are achieved when compared to conventional dig and replace. In the end, the municipality, large or small, will have an “as new” system that is totally free of inflow and infiltration.\r\n\r\n \r\n
![\"LMK](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2017\/08\/lmk.jpg\")
<\/a>LMK TECHNOLOGIES<\/h4>\r\nLMK’s T-Liner is a one-piece homogenous main and lateral CIPP connection liner that is ASTM F2561 compliant. T-Liner has a uniform wall thickness and can be installed with either polyester or epoxy resin. Both the mainline and lateral sections are formed as a structural cylinder that renews 18-in. and 360-degrees of the mainline and extends up the lateral pipe as one continuous lining. T-Liner with Insignia compression gasket-sealing technology provides a verifiable non-leaking system. These compression gaskets are embedded between the host pipe and the T-Liner and are compatible with all pipe types including polyethylene.\r\n
![\"milliken\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/milliken-infrastructure-300x200.jpg\")
<\/a>MILLIKEN INFRASTRUCTURE<\/h4>\r\nAs a proven leader in geopolymer technology, Milliken Infrastructure’s range of geopolymer mortar products is a cost-effective solution that rapidly creates a new structural pipe inside an old pipe, with little to no public disruption. Recently, the company announced the addition of GeoSpray 61 to its line of geopolymer mortar system solutions. Building on the company’s core geopolymer expertise, GeoSpray 61 is ideally suited for rehabilitation and protection of pipes and structures used in potable water systems. GeoSpray 61 is third-party tested and NSF\/ANSI 61-2014 certified to allow asset owners and design engineers to extend the operating life of their existing assets.\r\n
![\"Pure](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/04\/pure-technologies.jpg\")
<\/a>PURE TECHNOLOGIES<\/h4>\r\nPure Technologies is a world leader in the development and application of innovative technologies for inspection, monitoring and management of large diameter water and wastewater pressure pipelines. Pure’s expertise and technologies are being used around the world to help utility operators mitigate pipeline deterioration and maximize capital budgets for rehabilitation and replacement programs. The environments our technologies and tools operate in are pressurized, hostile and often lack redundancy. These unique operational challenges have pushed Pure’s research and development efforts to refine our technology platforms to serve a wide variety of clients with varying pipe materials and operational constraints.\r\n
![\"Saertex\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2017\/08\/saertex.jpg\")
<\/p>\r\n\r\n
SAERTEX<\/h4>\r\nSAERTEX multiCom is a global manufacturer of UV cure, GRP CIPP liners, offering environmentally responsible pipeline rehabilitation solutions. The UV cure SAERTEX-LINER is a tight-fitting, high-strength, environmentally friendly product for the rehabilitation of sanitary sewers, storm and pressure pipes. SAERTEX multiCom is excited to introduce our newly developed UV cure, water liner. You can now rehabilitate potable water pipes, 8- to 48-in., using the same UV curing technology. The UV cure SAERTEX-LINER offers fast installation times, less disruption and a small carbon foot print. The SAERTEX-LINER is manufactured in 6- to 64-in. diameters, as well as irregular shapes and transitions. SAERTEX multiCom has the latest UV curing equipment available for rent and purchase. Our highly experienced technicians will train and support you on all aspects of installing the product.\r\n\r\n
<\/a>LIQUIFORCE<\/h4>\r\nLiquiForce is home to GRAVITY, a totally trenchless program of sewer rehabilitation, from the home to the treatment plant. All of the rehabilitation equipment has been adapted so that it enters through the manholes and the work is done with no disruption to the normal sewer flows. The materials used in the sewer renewal have a design life of 50 years, (with a factor of two) and are expected to last 100 years or more. Through the use of multi-year programs, cities have found that savings of 50 per cent and more are achieved when compared to conventional dig and replace. In the end, the municipality, large or small, will have an “as new” system that is totally free of inflow and infiltration.\r\n\r\n \r\n
<\/a>LMK TECHNOLOGIES<\/h4>\r\nLMK’s T-Liner is a one-piece homogenous main and lateral CIPP connection liner that is ASTM F2561 compliant. T-Liner has a uniform wall thickness and can be installed with either polyester or epoxy resin. Both the mainline and lateral sections are formed as a structural cylinder that renews 18-in. and 360-degrees of the mainline and extends up the lateral pipe as one continuous lining. T-Liner with Insignia compression gasket-sealing technology provides a verifiable non-leaking system. These compression gaskets are embedded between the host pipe and the T-Liner and are compatible with all pipe types including polyethylene.\r\n
<\/a>MILLIKEN INFRASTRUCTURE<\/h4>\r\nAs a proven leader in geopolymer technology, Milliken Infrastructure’s range of geopolymer mortar products is a cost-effective solution that rapidly creates a new structural pipe inside an old pipe, with little to no public disruption. Recently, the company announced the addition of GeoSpray 61 to its line of geopolymer mortar system solutions. Building on the company’s core geopolymer expertise, GeoSpray 61 is ideally suited for rehabilitation and protection of pipes and structures used in potable water systems. GeoSpray 61 is third-party tested and NSF\/ANSI 61-2014 certified to allow asset owners and design engineers to extend the operating life of their existing assets.\r\n
<\/a>PURE TECHNOLOGIES<\/h4>\r\nPure Technologies is a world leader in the development and application of innovative technologies for inspection, monitoring and management of large diameter water and wastewater pressure pipelines. Pure’s expertise and technologies are being used around the world to help utility operators mitigate pipeline deterioration and maximize capital budgets for rehabilitation and replacement programs. The environments our technologies and tools operate in are pressurized, hostile and often lack redundancy. These unique operational challenges have pushed Pure’s research and development efforts to refine our technology platforms to serve a wide variety of clients with varying pipe materials and operational constraints.\r\n
<\/p>\r\n\r\n
SAERTEX<\/h4>\r\nSAERTEX multiCom is a global manufacturer of UV cure, GRP CIPP liners, offering environmentally responsible pipeline rehabilitation solutions. The UV cure SAERTEX-LINER is a tight-fitting, high-strength, environmentally friendly product for the rehabilitation of sanitary sewers, storm and pressure pipes. SAERTEX multiCom is excited to introduce our newly developed UV cure, water liner. You can now rehabilitate potable water pipes, 8- to 48-in., using the same UV curing technology. The UV cure SAERTEX-LINER offers fast installation times, less disruption and a small carbon foot print. The SAERTEX-LINER is manufactured in 6- to 64-in. diameters, as well as irregular shapes and transitions. SAERTEX multiCom has the latest UV curing equipment available for rent and purchase. Our highly experienced technicians will train and support you on all aspects of installing the product.\r\n\r\n
<\/a>MILLIKEN INFRASTRUCTURE<\/h4>\r\nAs a proven leader in geopolymer technology, Milliken Infrastructure’s range of geopolymer mortar products is a cost-effective solution that rapidly creates a new structural pipe inside an old pipe, with little to no public disruption. Recently, the company announced the addition of GeoSpray 61 to its line of geopolymer mortar system solutions. Building on the company’s core geopolymer expertise, GeoSpray 61 is ideally suited for rehabilitation and protection of pipes and structures used in potable water systems. GeoSpray 61 is third-party tested and NSF\/ANSI 61-2014 certified to allow asset owners and design engineers to extend the operating life of their existing assets.\r\n
<\/a>PURE TECHNOLOGIES<\/h4>\r\nPure Technologies is a world leader in the development and application of innovative technologies for inspection, monitoring and management of large diameter water and wastewater pressure pipelines. Pure’s expertise and technologies are being used around the world to help utility operators mitigate pipeline deterioration and maximize capital budgets for rehabilitation and replacement programs. The environments our technologies and tools operate in are pressurized, hostile and often lack redundancy. These unique operational challenges have pushed Pure’s research and development efforts to refine our technology platforms to serve a wide variety of clients with varying pipe materials and operational constraints.\r\n
<\/p>\r\n\r\n
SAERTEX<\/h4>\r\nSAERTEX multiCom is a global manufacturer of UV cure, GRP CIPP liners, offering environmentally responsible pipeline rehabilitation solutions. The UV cure SAERTEX-LINER is a tight-fitting, high-strength, environmentally friendly product for the rehabilitation of sanitary sewers, storm and pressure pipes. SAERTEX multiCom is excited to introduce our newly developed UV cure, water liner. You can now rehabilitate potable water pipes, 8- to 48-in., using the same UV curing technology. The UV cure SAERTEX-LINER offers fast installation times, less disruption and a small carbon foot print. The SAERTEX-LINER is manufactured in 6- to 64-in. diameters, as well as irregular shapes and transitions. SAERTEX multiCom has the latest UV curing equipment available for rent and purchase. Our highly experienced technicians will train and support you on all aspects of installing the product.\r\n\r\n
<\/p>\r\n\r\n
