California Awaits: Don’t Miss NASTT’s 2018 No-Dig Show
February 7, 2018
\r\n
![\"sauereisen\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/sauereisen.jpg\")
<\/a>SAUEREISEN<\/h4>\r\nSauereisen SewerGard 210XHB is an epoxy protective lining specifically formulated for municipal wastewater environments. SewerGard 210XHB provides a chemical-resistant barrier for concrete, masonry, brick, and steel substrates. As a 100 percent solids epoxy polymer, 210XHB is specified to protect infrastructure throughout the wastewater industry. SewerGard 210XHB is a fast setting; high strength lining that enables high build capabilities up to 300 mils in a single coat. Applications range from manholes and lift stations within the collection systems to tankage, structural steel, digesters, clarifiers, and secondary containment at treatment plants. Installation of SewerGard 210XHB is completed using plural component spray equipment. Booth #240\r\n
![\"sealing](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/sealing-systems-inc.jpg\")
<\/a>SEALING SYSTEMS INC.<\/h4>\r\nInfi-Shield Gator Wrap prevents infiltration and erosion by providing a water-tight seal around any manhole, catch basin or pipe joint. Infi-Shield Gator Wrap resists harsh soil conditions and also provides a root barrier for any crack or joint. Infi-Shield Gator Wrap is made of a stretchable, self-shrinking, intra-curing halogenated based rubber. The back side of each seal is coated with a cross-linked re-enforced butyl adhesive. The seal is designed to stretch around the joint and then overlapped creating a cross-link and fused bond between the rubber and butyl adhesive. Infi-Shield Gator Wrap installs easily with no special tools and can be immediately backfilled. For more information, call 1-800-478-2054, email info@ssisealingsystems.com<\/a> or visit ssisealingsystems.com<\/a>. Booth #449\r\n
![\"sipptech\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/sipptech.jpg\")
<\/a>SIPP TECHNOLOGY (SIPPTECH)<\/h4>\r\nSippTechnology is the designer, engineer and manufacturer of SippSteel – a structurally independent and permanent rehabilitation solution. The SippSteel multidimensional, robotic system provides an approach to generate structurally independent linings for a wide range of pressure and non-pressure pipe systems. This SIPP system uses both individually specific and a synergetic combination of computer-vision, LIDAR ultrasound, RF, Wi-Fi, gyroscope, accelerometer and machine learning technologies to both precisely navigate and apply the SippSteel composite inside of the pipe. The robotic devise can be operated via umbilical or autonomously providing lengths of more than a mile from one access point in the pipe. The result is minimal construction time, minimal consumer disruption, lowered cost and environmental footprint. Our innovative technology addresses current industry limitations with designs specifically engineered to alleviate the lack of versatility common with other rehabilitation methods; therefore, affording a viable method for the structural rehabilitation to the pipeline owner and end user. Booth #215\r\n\r\n
<\/a>SEALING SYSTEMS INC.<\/h4>\r\nInfi-Shield Gator Wrap prevents infiltration and erosion by providing a water-tight seal around any manhole, catch basin or pipe joint. Infi-Shield Gator Wrap resists harsh soil conditions and also provides a root barrier for any crack or joint. Infi-Shield Gator Wrap is made of a stretchable, self-shrinking, intra-curing halogenated based rubber. The back side of each seal is coated with a cross-linked re-enforced butyl adhesive. The seal is designed to stretch around the joint and then overlapped creating a cross-link and fused bond between the rubber and butyl adhesive. Infi-Shield Gator Wrap installs easily with no special tools and can be immediately backfilled. For more information, call 1-800-478-2054, email info@ssisealingsystems.com<\/a> or visit ssisealingsystems.com<\/a>. Booth #449\r\n
