California Awaits: Don’t Miss NASTT’s 2018 No-Dig Show
February 7, 2018
\r\n
![\"pica\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/pica.jpg\")
<\/a>PICA CORP.<\/h4>\r\nPICA launched two new products in 2017: The Internal SeeSnake EMIT Tool for the condition assessment of large diameter pre-stressed concrete cylinder pipe (PCCP) and the Internal and External Bracelet Probes for detection of far-side pitting. The External Bracelet was used extensively for H2S damage detection on force mains and the internal Bracelet was used to detect corrosion damage on a 60-in. steel liner. These tools, along with PICA’s standard free-swimming or tethered SeeSnake Tools are available immediately for field deployment. PICA has always set a high standard for resolution and sensitivity of its Tools and these new tools are no exception. Defects in the pipes cannot hide from PICA’s tools. For more information, visit picacorp.com<\/a> or call 800-661-0127. Booth #515\r\n
![\"plastics](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/plastics-pipe-institute.jpg\")
<\/a>PLASTICS PIPE INSTITUTE<\/h4>\r\nHigh-density polyethylene pipe is the No. 1 trenchless solution for HDD, pipe bursting, sliplining and Swagelining. In addition, properly designed and installed high performance PE4710 piping systems are seismic resistant, fatigue and water hammer resistant, impact resistant, corrosion resistant and provide utilities and rate payers with sustainable solutions at the lowest life cycle costs. Also, HDPE is the only fusible product with ASTM trenchless standards and ASTM heat fusion standards (F3190, F2620, F1962, F1290, F1055, F585). AWWA standards and manual (C901, C906, M55) also cover fusible HDPE pipe. Visit us online and at plasticpipe.org or at the 2018 NASTT No-Dig Show to learn more about these exciting HDPE trenchless solutions for service, distribution and transmission water pipes (up to 65 in.). Booth #253\r\n
![\"ramvac\"](\"https:\/\/trenchlesstechnology.com\/wp-content\/uploads\/2018\/01\/ramvac-sewer-equipment-co.jpg\")
<\/a>RAMVAC<\/h4>\r\nThe HX-12 by RAMVAC features a 12-yd debris tank, for when you can’t leave a big job to unload material. This RAMVAC series features the industry’s only temperature-controlled environmental chamber that contains the entire water system, including water tanks. Also touting a directional discharge system, so you can off load your debris back into the excavation site when you are done and allows operators to blow obstructions out of the dig hose and get back to work. Other great features include a long range wireless remote, NEMA 4 electrical system, a 900,000 BTU water boiler, and a 3-stage cyclonic filtration system. The standard 4,400 CFM blower will match the performance of larger blower machines while delivering class leading fuel economy. Also available with a RamAir air excavation system touting a 185 cfm at 150 PSI air compressor, for when you can’t risk adding water to the problem area. For more information, contact RAMVAC Vacuum Excavators by Sewer Equipment at sales@ram-vac.com<\/a> or call 888-477-7638. Booth #531\r\n
<\/a>PLASTICS PIPE INSTITUTE<\/h4>\r\nHigh-density polyethylene pipe is the No. 1 trenchless solution for HDD, pipe bursting, sliplining and Swagelining. In addition, properly designed and installed high performance PE4710 piping systems are seismic resistant, fatigue and water hammer resistant, impact resistant, corrosion resistant and provide utilities and rate payers with sustainable solutions at the lowest life cycle costs. Also, HDPE is the only fusible product with ASTM trenchless standards and ASTM heat fusion standards (F3190, F2620, F1962, F1290, F1055, F585). AWWA standards and manual (C901, C906, M55) also cover fusible HDPE pipe. Visit us online and at plasticpipe.org or at the 2018 NASTT No-Dig Show to learn more about these exciting HDPE trenchless solutions for service, distribution and transmission water pipes (up to 65 in.). Booth #253\r\n
